Boron Carbide Nozzles Common Applications

      Nozzles are a key component, or even the main component, of many types of spraying, misting, oil blasting, sand blasting equipment and burners, such as the more common sprinkler irrigation equipment in agriculture. Through the nozzle can be powdered coal or sand particles sprayed out at high speed, and the nozzle is subjected to solid particles of erosion and abrasion.
      Due to the high flow rate of the solid particles, the nozzles are subjected to severe wear and tear. If the spray coal combustion, it is also subject to temperature and flue gas corrosion; if the spray liquid slurry, it will be subject to corrosion of the liquid medium.          Therefore, the working conditions of the nozzle is still worse, in this case, people developed a boron carbide ceramic nozzle.

      Boron carbide material is known as one of the three hardest materials, which has a low density, high hardness, chemical stability, and boron carbide ceramic nozzles also have high temperature, oxidation resistance, high strength, extreme cold and extreme heat, thermal shock resistance and other characteristics, can be made spiral nozzle and vortex nozzle.

      Because of the high hardness of boron carbide ceramics, when used as a nozzle, it also has the advantages of corrosion resistance, abrasion resistance, and does not rust, and has a low wear rate. Boron carbide ceramic nozzle can be commonly applied to:

1. Applied to agricultural watering, change the traditional irrigation mode, reduce the frequency of equipment replacement, cost savings.
2. Applied to spraying, in the metal parts surface phosphating, passivation, degreasing and other operations, you can spray paint on metal parts, can be operated in a high temperature environment.
3. Applied to humidification, in the factory, storage room, textile workshop, printing plant and other places in the humidification work, through the regular sprinkling of these sites, you can effectively textile static electricity, thus reducing these places due to static electricity caused by fire accidents.

      Boron carbide ceramic nozzles in the use of centrifugal spray dryer, but also achieved a better use of results. The original stainless steel nozzle can only be used for dozens of hours, and the use of boron carbide nozzles, the service life of up to half a year, than the original stainless steel tens of times.